UNIFIED AUTOMATION IS WILLING TO LICENSE THE ACCOMPANYING SOFTWARE AND SERVICES AND ASSOCIATED DOCUMENTATION INCLUDING AUTHORIZED COPIES OF EACH (THE "SOFTWARE") TO YOU ("LICENSEE") ONLY ON THE CONDITION THAT LICENSEE ACCEPTS ALL OF THE TERMS IN THIS AGREEMENT.
The licensed SOFTWARE is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The licensed SOFTWARE is licensed, not sold. Unified Automation shall own all right, title and interest including the intellectual property rights in and to the information on bug fixes or error corrections relating to the licensed SOFTWARE that are submitted by Licensee to Unified Automation as well as any intellectual property rights to the correction of any errors, if any.
PLEASE READ THE TERMS CAREFULLY BEFORE INSTALLING THE SOFTWARE. BY INSTALLING THE SOFTWARE, LICENSEE ACKNOWLEDGES THAT LICENSEE HAS READ AND UNDERSTANDS THIS AGREEMENT AND AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS. THE EFFECTIVE DATE OF THIS AGREEMENT SHALL BE THE DATE UPON THE SOFTWARE WAS FIRST DELIVERED TO YOU OR FIRST DOWNLOADED BY YOU.
IF LICENSEE DOES NOT ACCEPT THESE LICENSE TERMS, THEN UNIFIED AUTOMATION DOES NOT GRANT ANY LICENSE TO THE SOFTWARE, AND LICENSEE MUST NOT DOWNLOAD OR INSTALL THE SOFTWARE.
General Note: All SOFTWARE delivered to you under the terms of experimental, pre-release, technical-preview, beta version, including related documentation and materials (collectively called “Beta-Products”), are provided “AS-IS”, without warranty, support, or availability commitments and Unified Automation does not assume any liability. You may not deploy/redistribute or make accessible Beta-Products to any third party. Beta-Products may only be used for the purpose of testing and evaluating their functionality and providing feedback to Unified Automation. Any productive use of the Beta-Products or their use in a productive environment shall not be permitted unless otherwise explicitly agreed. Beta-Products are not subject to Unified Automation’s usual tests and quality controls. They may not meet the usual security standards, they may contain functional and performance deficiencies, availability issues or other errors. Beta-Products do not imply any obligation on Unified Automation to (further) develop the Beta-Products to productive maturity and to publish a productive version containing some or all functionalities of the corresponding Beta-Product.
If you downloaded a trial or evaluation version of the SOFTWARE from Unified Automation’s website or obtained it through other means, you may install and use one copy of the SOFTWARE on a single computer of your organization, solely for evaluation and testing purposes during the evaluation period (typically three (3) month from first installation/use). You may not use the SOFTWARE for commercial purposes. You may not make accessible the SOFTWARE to third parties and you must make sure that no one except your authorized employees have access to the computer where the SOFTWARE is installed. The SOFTWARE may contain a disabling mechanism that will prevent it from being used after the evaluation period. You must not tamper with the disabling mechanism of the SOFTWARE. After the evaluation period, if you do not order the released version of the SOFTWARE, you must remove/destroy the SOFTWARE and Documentation without delay.
If you purchased Runtime License, you are permitted to use the SOFTWARE according to the number of purchased licenses. For each license you are permitted to install and use one copy of the SOFTWARE on a single computer (respectively one single instance of a VirtualMachine), you might deploy or install the SOFTWARE together with your end-user products or stand alone. You are not allowed to use the SOFTWARE’s activities and functions as a service (including but not limited to SaaS operation) to provide such service to any third party beneficiary. The SOFTWARE may have a mechanism to identify every single installation on a particular computer/instance e.g. key, hardware (non-transferable) or dongle (transferable). You must not tamper with the identification mechanism.
If you purchased Runtime OEM License, you are permitted to use the SOFTWARE on an unlimited number of computers, but distribute and use only in conjunction with one (1) end-user product the Runtime OEM License was purchased for. You are permitted to redistribute, deploy and/or install the SOFTWARE together with your end-user product, as integral part of or as stand alone installation setup procedure, as long as you insure that the SOFTWARE installation is preconfigured, customized and/or brand labeled and by this restricting (licensing) the use of the SOFTWARE to just the end-user product it was purchased for only. You are not allowed to use the SOFTWARE’s activities and functions as a service (including but not limited to SaaS operation) to provide such service to any third party beneficiary. The SOFTWARE may have a mechanism for identification of the licensed end-user product e.g. key, ProgID or ProductURI (non-transferable). You must not tamper with the identification, licensing and binding mechanism.
If you purchased Runtime Subscription License, you are permitted to use the SOFTWARE according to the number of purchased licenses, but for time limited duration of 365 days unless otherwise explicitly agreed. For each license you are permitted to install and use one copy of the SOFTWARE on a single computer/instance, you might deploy or install the SOFTWARE together with your end-user products or stand alone, you are allowed to run and/or make use of the SOFTWARE for the duration as given by the subscription interval. Starting from it’s initial activation the SOFTWARE the subscription will automatically renew before expiry of subscription period unless renewal was cancelled 60 days prior to expiry. You are not allowed to use the SOFTWARE’s activities and functions as a service (including but not limited to SaaS operation) to provide such service to any third party beneficiary. The SOFTWARE may have a mechanism to identify every single installation on a particular computer/instance and may have a mechanism to detect initial subscription start time and runtime duration, including but not limited to online subscription license verification e.g. key, hardware (non-transferable) or dongle (transferable) and/or time validation (subscription) and/or online/offline subscription verification (internet/intranet license server). You must not tamper with the identification mechanism.
A binary developer license grants the use of the SOFTWARE for the purpose of software development of OPC enabled products or applications. If you have purchased a binary developer license the SOFTWARE may be used within your organization by a single developer to actively develop applications. Multiple copies of the SOFTWARE may exist on more than one computer, as long as the use of the SOFTWARE is by the same developer. In addition, the Licensee is permitted to deploy unlimited number of end-user application(s) making use of the SOFTWARE. The SOFTWARE might be used by being compiled into, linked or bind to your end-user application. All use of the SOFTWARE shall be solely in accordance with the documentation.
You are NOT allowed to resell, rent, lease or sublicense an unmodified or modified version of the SOFTWARE as stand-alone product, nor to build toolkit or developer tools from it. You are permitted to use the SOFTWARE to build, deploy, sell and distribute end-user application(s).
Licensee must comply with all of the following:
In addition to the above 1.3; if you have purchased the source code developer license of the SOFTWARE, you must use reasonable efforts to maintain the confidentiality of the source code, including ensuring that it is installed and used only on the machines belonging to Licensee's organization and that it is used only by a single developer for development of components and applications that use the SOFTWARE and that the source code is not otherwise used or copied.
The Product Development & Distribution License grants the use of the SOFTWARE for the purpose of software development of one (1) OPC UA enabled end-user product per license. In addition, you are permitted to deploy/distribute the resulting end-user product. The SOFTWARE might be used by being compiled into, linked or bind to your end user application. All use of the SOFTWARE shall be solely in accordance with the documentation.
You are NOT allowed to distribute, resell, rent, lease or sublicense an unmodified or modified version of the SOFTWARE as stand-alone product, nor to build any toolkit or developer type tool from it (e.g. you are NOT allowed to built another OPC UA toolkit or wrappers for other programming languages). The downstream receiving party shall NOT be able to again build UA enabled products or applications with the product or shipment you make. You are permitted to use the SOFTWARE to build, deploy, sell and distribute one (1) end-user product.
Licensee must comply with all of the following:
If you have purchased a Product Development & Distribution License the SOFTWARE may be used within your organization by team of developers within the department/division that is actively developing this one single product or application. Multiple copies of the SOFTWARE may exist on more than one computer for the sole purpose of active development and compiling, as long as the use of the SOFTWARE is for the one (1) end-user product only. You must limit the access to the SOFTWARE to the developers that are entitled to use it, which are those that "actively develop" (see 2.4) on the end-user product. You must insure that every single developer of such team has understood and follows all the rules in this Agreement
The Product Development & Distribution License is an annual license grant, which includes the right to distribute unlimited instances of the one (1) end-user product that contains the SOFTWARE or parts thereof by being linked into the end user application until license was canceled or is expired. By cancellation or not renewing annual license grant, the right to enhance and modify functionality and/or features that are based on or make use of the SOFTWARE ceases on the termination/expiry date. After termination/expiry of the annual license grant you may only use the SOFTWARE minimal required for the purpose of support and bug fix of the end user product that were already sold to customers at the time of termination or expiry.
Licensee acknowledges that Unified Automation is the sole owner of all rights in the SOFTWARE and in all of the know-how pertaining to this SOFTWARE except those described in Appendix A. It shall forbear to attack the rights of Unified Automation, unless Unified Automation asserts such rights against Licensee or Licensee attacks a patent or patent application (or similar, patent-related rights such as utility models) of Unified Automation. It will adequately inform third parties of Unified Automation’s ownership of those rights.
Licensee shall only be granted a limited right of usage to the extent to which it is absolutely necessary for the purposes of this agreement. The provisions following hereunder are characterizations of this principle and shall be narrowly construed in cases of doubt. Unified Automation’s copyright of the SOFTWARE shall not be exhausted by this agreement. Nothing in this provision shall be construed in a way as to prevent Licensee from defending its rights in case Unified Automation infringes Licensee patents, trademarks or copyrights, or misappropriates Licensee’s trade secrets.
The SOFTWARE may not be leased, assigned, or sublicensed, in whole or in part if and to the extent not expressly permitted in Section 1 (“Grant of License”) above. You may not make accessible the SOFTWARE to third parties and you must make sure that no one except your authorized Licensee has access to the computer(s) where the SOFTWARE is installed.
On written request by Licensee and upon prior authorization by Unified Automation, Licensee may transfer the single seat developer license granted under Section 1.3 and/ or 1.4 above permanently/temporarily to an affiliate or external subcontractor and assign another developer than the one originally designated. Licensee’s request must indicate the name, email address and full company postal address of the new developer and the reason for the requested transfer. Reason for temporarily transferred license must define a particular contracted development project of a component or product of the Licensee and a period of duration within valid maintenance subscription of the SOFTWARE. After written approval the Licensee is allowed to give the assignee - of this particular development project - access to the SOFTWARE while acting on account of and in the name of Licensee. The Licensee must insure that such external development partner is following all rules of the SLA and that the development partner is not using the SOFTWARE for any other purpose than this particular development project with the Licensee. The rights of the recent developer to use the SOFTWARE cease upon Unified Automation’s consent to the transfer.
On written request by Licensee and upon prior authorization by Unified Automation, Licensee may transfer the single product development license by changing the registered name and OPC UA Product URI of the end user product the license granted under Section 1.5 was originally purchased for. On such transfer the license granted under Section 1.5 above is permanently assigned to the new end user product's name and OPC UA Product URI. The development rights and the distribution allowance of the recent end-user product containing the SOFTWARE cease upon Unified Automation’s consent to the transfer.
Unified Automation remains the right to refuse such transfer for good cause. The written consent shall not be unreasonably withheld, i.e. transferring to a direct competitor of Unified Automation, insufficient license identification criteria, or renaming to an already registered name, or insufficient uniqueness of OPC UA Product URI causes reasonable refuse.
Each transfer of a license temporarily or permanently and/or each re-assignment of use rights may incur an additional transfer fee.
The SOFTWARE is "in use" on a computer when it is loaded into temporary memory (i.e. RAM) or installed into permanent memory (e.g. hard disk, CD-ROM, or other storage device) of that computer, except that a copy installed on a network server for the sole purpose of distribution to other computers (e.g. file share, backup) is not "in use".
For the developer license granted under Section 1.3 and/ or 1.4 and/ or 1.5 above, the authorization of use encloses the "active development", which is the intellectual process of writing code that uses the SOFTWARE, including but not limited to programming against the SOFTWARE's interfaces and compiling and/or linking the SOFTWARE's libraries. E.g. an automated buildbot would compile the SOFTWARE, but would not use it in the scope of "active development" and hence does not require a license.
Licensee may enter the source code and/or object code of the SOFTWARE into a software change management system (e.g. such as IBM Rational ClearCase, CVS or GIT repository), which will allow the source code and/or object code to be viewed by unlicensed developers (e.g. for the purpose of static code analysis or security review). The foregoing is not a violation of this Agreement as long as no "active development" (i.e. programming against the SOFTWARE's API) is performed, and as long as the confidentiality of the SOFTWARE’s source code and related information is protected using the same degree of care used to protect Licensees own similar proprietary and confidential information.
The SOFTWARE is confidential copyrighted information of Unified Automation and title to all copies is retained by Unified Automation and/or its licensors. Licensee shall not combine or link the SOFTWARE with open source software or components, if that joint work forces appliance of terms and conditions of such open source license on the SOFTWARE itself or portions thereof which are contradicting with the terms and conditions of this Agreement. Licensee shall not decompile, disassemble, decrypt, extract, or otherwise reverse engineer the SOFTWARE. As an exception to the forgoing, modification of the SOFTWARE and reverse engineering for debugging such modifications are permitted for the own use of Licensee and the customer of the licensee, narrowed to the minimum required for dynamically linking with LGPLv2.1 licensed GNU C-Library. In any case, it is prohibited to share any findings due to Reverse Engineering with any third party and it is prohibited to distribute modified version of the SOFTWARE. All warranty rights cease on modification of the SOFTWARE.
SOFTWARE is not designed or intended for use in critical safety systems including but not limited to nuclear facilities or activity, production of land mines or cluster bombs, aircraft communication and aircraft control systems, life critical healthcare systems or any life-support equipment or other situations in which case of failure of the SOFTWARE could lead to radiation, chemical and environmental damages, injury and contamination as well as death, personal injury or severe physical damages as well as death.
The Licensee has sole responsibility for designing and implementing a solution making use of the licensed SOFTWARE which will meet all appropriate safety requirements and/or standards. Unified Automation disclaims all liability for any damages arising as a result of any non-conformance of the solution of the Licensee to safety requirements and/or standards. Unified Automation further disclaims all liability for any damages resulting from dangerous use or misuse of its licensed SOFTWARE. Licensee shall indemnify, hold harmless and Unified Automation and its suppliers and Unified Automation's and its suppliers respective officers, directors, employees and agents (each an "Indemnified Party") from against any damages, fines, penalties, assessments, liabilities, costs and expenses (including reasonable attorneys' fees and costs) in the event that any claim is brought against any Indemnified Party arising from your dangerous use of the SOFTWARE from all liability resulting from such use(s), whether based on contract, warranty, tort (including negligence), strict liability or any other legal theory, regardless of whether Unified Automation had knowledge of the possibility of such damages or not.
The name Unified Automation is synonymous with high-quality OPC and OPC UA software products and services. Unified Automation trademarks are extremely valuable because they represent the standards of excellence and consistent quality associated with Unified Automation. Your use must not mislead consumers as to any Unified Automation sponsorship, affiliation, or endorsement of your company, or of your products or services. If you use Unified Automation trademarks you must follow this rules:
List of current trademarks: Unified Automation®, UaExpert®, UaGateway®, UaModeler®
Example: Unified Automation, UaExpert and UaModeler are either registered trademarks or trademarks of Unified Automation GmbH in Germany and Europe and/or other countries.
General General Warranties: Unified Automation represents and warrants that: (a) it has the unqualified right to grant the licenses granted in this Agreement; (b) it has not granted any conflicting rights, and no third party contractual duty will be breached by entering into this Agreement; (c) the SOFTWARE (expressly excluding all Third Party components as listed in Appendix A) does not infringe or violate the intellectual property rights of any third party; (d) it will comply with, and conducts its operations according to, applicable laws, rules, codes, regulations, ordinances, and similar governmental directives of Germany and the European Union. (e) the SOFTWARE (expressly excluding all Third Party components as listed in Appendix A) does not require a license for export, and if any export license is required following the effective date, Unified Automation will notify Licensee promptly in writing; (f) the SOFTWARE does not contain any harmful code; (g) SOFTWARE will not be infected with a virus when it is shipped to Licensee; and (h) the Software will operate and conform properly based on the functionality exercised in the included demonstration application(s).
The parties agree that it is not possible to develop SOFTWARE thus that it meets all the requirements of the application without error. Unified Automation shall make available a user documentation explaining the intended use and the using conditions of the SOFTWARE, which shall always be kept up to date.
Only defects in the SOFTWARE that occur within one (1) year after the download or delivery shall be remedied by Unified Automation, with no additional payment to Unified Automation, according to the statutory provisions. Claims for damages shall be expressly excluded from this time limitation. For all damage claims, the statutory limitation period shall apply.
n the event of critical failures (Class1 and Class2) reported by Licensee within the one (1) year warranty period, Unified Automation will eliminate these failures at the request of Licensee without undue delay, with no additional payment to Unified Automation, provided that these failures have been shown to result from failures in the SOFTWARE delivered by Unified Automation (exclusive Third Party software according to Appendix A). For this, Licensee will enable Unified Automation to access the project showing the corresponding failure, especially via a remote access or the making available of projects, which can be used in the development environment of Unified Automation in order to clearly reproduce the corresponding failure.
The parties agree that Class1 failures include the following cases:
The parties agree that Class2 failures include the following cases:
Failures which, irrespective of their classification, are a result of incorrect use and/or use outside the conditions recommended by Unified Automation (as described in the documentation and the example code) will be eliminated by Unified Automation upon written request of Licensee and compensated using the common Unified Automation cost rates.
The SOFTWARE and components are not intended to replace the professional skills and judgment of Licensee and its employees, agents and consultants. Licensee alone shall be responsible for the accuracy and adequacy of information and data furnished for processing and any use made by Licensee of the output of the SOFTWARE or any reliance thereon.
Unified Automation shall be liable towards Licensee to the fullest extent according to the statutory provisions.
Beyond a) to d) above, Unified Automation shall only be liable to Licensee in the event of damages caused by a negligent breach of a material contractual obligation. Unified Automation’s liability shall, however, in this case be limited to the typical, foreseeable damage. If possible by applicable law, Unified Automation's entire liability to Licensee and Licensee's exclusive remedy shall be, at Unified Automation's option, either (A) return of the price Licensee paid for the licensed SOFTWARE, or (B) repair or replacement of the licensed SOFTWARE.
All further liability shall be excluded.
The SOFTWARE or the use of the SOFTWARE may be subject to regulatory provisions related to products used in the Health Care Industry. Prior to using the SOFTWARE, it is Licensee’s responsibility to ensure that Licensee’s use of the SOFTWARE will not violate any legal or regulatory provisions nor deviate from the conditions intended for the use of the SOFTWARE as explained in the user documentation.
You expressly acknowledge and agree that although Unified Automation grants the licenses to their SOFTWARE set forth herein, no assurances are provided by Unified Automation that certain configuration of the SOFTWARE or the use for a specific purpose does not infringe the patent or other intellectual property rights of any other entity. Unified Automation disclaims any liability to you for claims brought by any other entity based on infringement of intellectual property rights or otherwise. As a condition to exercising the rights and licenses granted hereunder, you hereby assume sole responsibility to secure any other intellectual property rights needed, if any. For example, if a third party patent license is required to allow you to use the SOFTWARE for a certain purpose or specific use case, it is your responsibility to acquire that license before distributing or using the SOFTWARE.
If notified promptly in writing of any action (and provided that Unified Automation has been promptly notified of all prior claims relating to such action) brought against Licensee based on a claim that the unaltered release of the SOFTWARE infringes a third party patent or copyright, Unified Automation shall, upon request of Licensee, defend such action at its expense including attorneys’ fees and expert fees and pay any costs or damages finally awarded in such action which are attributable to such claim, provided that Unified Automation shall have sole control of the defense of any such action and of all negotiations for its settlement or compromise. United Automation shall not be obliged to defend such action if the infringement is based on a prior version of the SOFTWARE, the infringement has been fixed in the current version and Unified Automation has offered a free-of-charge update to Licensee before the claim arose.
If a final injunction is obtained against Licensee of any of the SOFTWARE by reason of infringement of a patent or copyright, or if in Unified Automation’s opinion any of the SOFTWARE supplied to Licensee hereunder is likely to become the subject of a successful claim of infringement of a patent or copyright, Unified Automation shall, at its option and expense, either procure for Licensee the right to continue using such SOFTWARE or replace or modify the same so that it becomes non-infringing or, if neither of the above options is commercially reasonable, Unified Automation will grant Licensee a full refund for such SOFTWARE and accept their return. All rights of Licensee under the license granted according to this Agreement shall cease upon the return of the SOFTWARE.
Notwithstanding the foregoing, Unified Automation shall not have any liability to Licensee under this Section if the infringement or claim is based upon the use of any of the SOFTWARE in combination with other equipment or software which is not furnished by Unified Automation (if such claim would have been avoided in case the SOFTWARE was not in such combination, including but not limited to the combination with Third-Party components listed in Appendix A), SOFTWARE which have been modified or altered by Licensee if the SOFTWARE would not infringe but for the modification or alteration or if intellectual property rights owned by Licensee, the relevant customer or any of their respective affiliates.
Nothing in the forgoing shall prevent the Licensee at its option and expense to defend itself against claims brought against his end user products that are based on or make use of the SOFTWARE independent of a certain use case of such end user products or to procure the respective rights or to replace or modify the SOFTWARE so that it becomes non-infringing.
The License shall be for a period commencing upon the date of initial download or delivery of the SOFTWARE and continuing until such time this agreement is terminated in accordance with this agreement, but otherwise without limitation as to duration.
Unified Automation shall have the right to terminate this agreement if Licensee fails to pay any required license fee(s) or otherwise fails to comply with the license terms and conditions described in Section 1. Unified Automation shall give written notice to Licensee of such fault, and if such fault has not been remedied within thirty (30) days after, the license granted hereunder shall terminate.
On termination Licensee loses the rights granted in section 1 and 2 and is not allowed to actively develop new products nor enhance existing products or otherwise make use of or install the SOFTWARE.
After cancellation or termination you may only use the SOFTWARE minimal required for the purpose of support and bug fix of end-user application(s) that were already sold to customers at the time of cancellation or termination. If requested, License will certify in writing as to the destruction or return of the SOFTWARE and all copies in its possession.
Each party’s right to terminate the agreement for due cause according to the statutory provisions remains unaffected.
In the event that licensee has obtained a developer license, runtime license or source code license, Unified Automation reserves the right to reference Licensee as one of Unified Automation's customers by mentioning Licensee's company name in documents such as, but not limited to, web pages of Unified Automation's website, emails originating from Unified Automation's employees, publicity brochures and fact sheets, unless explicitly stated otherwise by Licensee. In no event shall Unified Automation publish any other information about Licensee other than the single fact that Licensee is a customer of Unified Automation.
This agreement shall be governed by the laws of Germany. This agreement will not be governed by the United Nations Convention of Contracts for the International Sale of Goods, or by the Uniform Commercial Code, the application of which are expressly excluded. If the Licensee is a businessperson and has general jurisdiction (legal domicile) within Germany, sole venue for all disputes arising directly or indirectly out of the contract shall be at the Defendant's place of business. If the Licensee has no general jurisdiction (legal domicile) within Germany, a court at Unified Automation’s company location in Nuremberg, Germany is the exclusive local jurisdiction and venue for any disputes arising from this agreement.
This Agreement is the parties' entire agreement relating to the SOFTWARE. It supersedes all prior or contemporaneous oral or written communications, proposals, warranties, and representations with respect to its subject matter, and following Licensee's acceptance of this license by clicking on the "Accept" Button or by installing and using the SOFTWARE, will prevail over any conflicting or additional terms of any quote, order, acknowledgment, or any other communications by or between the parties. No modification to this Agreement will be binding, unless in writing and signed by an authorized representative of each party.
Licensee acknowledges that the licensed SOFTWARE may be subject to export control restrictions of various countries. Licensee shall fully comply with all applicable export license restrictions and requirements as well as with all laws and regulations relating to the importation of the licensed SOFTWARE and/or modified SOFTWARE and/or applications making use of the SOFTWARE and shall procure all necessary governmental authorizations, including without limitation, all necessary licenses, approvals, permissions or consents, where necessary for the re-exportation of the licensed SOFTWARE, modified SOFTWARE or applications making use of the SOFTWARE.
Unified Automation’s obligations under this Agreement are conditioned upon Licensee’s compliance with, and Licensee agrees to comply with, all applicable export and re-export controls, embargoes, and economic and trade sanctions laws and regulations, including in any event, those of the United States and the European Union (“Export Laws”).
Licensee represents that any SOFTWARE provided hereunder and any derivatives thereof will not be (i) downloaded or accessed by a Sanctioned Person, (ii) exported, re-exported (including any ‘deemed exports’), shipped, distributed, delivered, sold, resold, supplied, or otherwise transferred, directly or indirectly, to any Sanctioned Person or otherwise in a manner contrary to the Export Laws, (iii) used for any purpose prohibited by the Export Laws, or unless expressly authorized by Unified Automation in writing, (iv) used for non-civilian purposes (e.g. armaments, nuclear technology, weapons, any other usage in the field of defense and military).
Without limiting the foregoing, Licensee represents and warrants that (i) it is not a Sanctioned Person, and (ii) it will not download or otherwise access, or facilitate a third party’s download or access of, any SOFTWARE and any derivatives thereof from a Sanctioned Country. Licensee will, at least once per year, review and update its list of users who have access to the SOFTWARE and confirm that no such user is a Sanctioned Person and that all such users may continue to access SOFTWARE in compliance with Export Laws. Unified Automation may conduct the necessary Export Laws checks and, upon request, Licensee will promptly provide Unified Automation with any necessary information.
“Sanctioned Country” means a country or territory that is itself the subject or target of any comprehensive trade or economic sanctions (currently Cuba, Iran, North Korea, Syria, and the Crimea region of Ukraine).
“Sanctioned Person” means any person (i) listed in the Specially Designated Nationals and Blocked Persons List maintained by the U.S. Department of Treasury’s Office of Foreign Assets Control or in any Export-Control-Related list of designated persons maintained by the U.S. Department of Commerce, the U.S. Department of State, the United Nations Security Council, the European Union, any Member State of the European Union, or the United Kingdom; (ii) operating, organized, or resident in a Sanctioned Country; (iii) the government of, or acting for or on behalf of the government of, Venezuela or a Sanctioned Country; or (iv) owned or controlled by one or more such persons.
If Licensee discloses to Unified Automation any information that is (i) Covered Defense Information or Controlled Unclassified Information as defined in U.S. Government regulations or (ii) subject to Export Laws that require controlled data handling, Licensee will notify Unified Automation personnel in advance of each instance of disclosure and will use the notification tools and methods specified by Unified Automation.
In the event that Licensee fails to comply with any provision outlined in this Agreement or violates any Export Laws in connection with the SOFTWARE, Unified Automation will have the right to take action in accordance with the terms of this Agreement and as required by U.S. law or the applicable law. Further, Licensee will indemnify and hold harmless Unified Automation, its affiliates and their representatives against any claims, damages, fines, and costs (including attorney’s fees and expenses) relating in any way to Licensee’s noncompliance with any provision outlined in this Agreement, including Licensee’s violation or alleged violation of any Export Laws.
Unified Automation will not be obligated to perform under this Agreement if such performance is prevented by any impediments arising out of national or international foreign trade or customs requirements or any embargoes or other sanctions.
There are no implied licenses or other implied rights granted under this Agreement, and all rights, save for those expressly granted hereunder, shall remain with Unified Automation and its licensors. In addition, no licenses or immunities are granted to the combination of the licensed SOFTWARE and/ modified SOFTWARE, as applicable, with any other software or hardware not delivered by Unified Automation under this Agreement.
Any terms and conditions that by their nature or otherwise reasonably should survive a cancellation or termination of this Agreement shall also be deemed to survive. Such terms and conditions include, but are not limited to the following Sections: 3, 5, 6, 7, 8, 10, 11, 12, 13 of this Agreement. Notwithstanding the foregoing, Section 2 shall not survive if the Agreement is terminated for material breach.
On termination the Licensee loses the rights granted in section 1 and 2 and is not allowed to actively develop new products nor enhance existing products. Exception: Section 2 shall survive for the purpose minimal required for the purpose of support and bug fix of end user products of the Licensee that were already sold to customers at the time of cancellation or termination.
If any of the above provisions are held to be in violation of applicable law, void, or unenforceable in any jurisdiction, then such provisions are herewith waived or amended to the extent necessary for the Agreement to be otherwise enforceable in such jurisdiction. However, if in Unified Automation’s opinion deletion or amendment of any provisions of the Agreement by operation of this paragraph unreasonably compromises the rights or increase the liabilities of Unified Automation or its licensors, Unified Automation reserves the right to terminate the Agreement.
Appendix A and B are part of the License Agreement and must be followed by the licensee.
Third Party Licenses and Open Source License Acknowledgment
The Unified Automation products use third-party and/or open source software as listed below. These third-party components are not part of the Unified Automation SOFTWARE itself and are delivered for convenience purposes only. All third-party components are delivered “as is”. These components are subject to the following licenses of their respective copyright owners. Licensee must fully comply with these license terms or must not use these components.
Overview on used third party components:
|
AnsiC Stack |
OpenSSL |
LibXML2 |
WCE LIBCEX |
WCE COMPAT |
BouncyCastle |
C-ARES |
ICU4C |
JSMN |
MQTT-C |
Mosquito |
|
|
HP C SDK |
- |
o |
- |
- |
- |
- |
o |
- |
o |
o |
- |
|
ANSI C SDK |
m |
o (1) |
- |
o (3) |
o (4) |
- |
- |
- |
o |
o |
- |
|
C++ SDK |
m |
o (1) |
o |
o (3) |
o (4) |
- |
- |
- |
o |
- |
o |
|
.NET SDK |
- |
o (2) |
- |
- |
- |
o (5) |
- |
- |
- |
- |
- |
|
UaModeler |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
|
UaGateway |
m |
m |
m |
- |
- |
- |
- |
- |
m |
- |
m |
|
UaExpert |
m |
m |
m |
- |
- |
- |
- |
- |
m |
- |
m |
|
UaGDS |
- |
m |
- |
- |
- |
- |
m |
m |
- |
- |
- |
m=mandatory; o=optional; -=not used; (1) recommended on Windows; (2) used by certificategenerator.exe; (3) used to compile SDK for WindowsCE only; (4) used to compile OpenSSL for WindowsCE only, requires dynamic linking of OpenSSL; (5) only required for .NET Core/Standard and latest UASecurityProfiles
This component includes software that was initially developed by the OPC Foundation. Unified Automation acquired a Commercial Source Code License (Buyout Agreement) with the OPC Foundation. Unified Automation has made custom modifications to the original code and its APIs which are kept proprietary. The derivate works as delivered with the SDKs, toolkits and runtime products of Unified Automation now completely falls under the respective license grant as in Section 1 and 2 of this SLA.
This software is based in part on
TThe OPC UA ANSI C Stack including any custom modifications and enhancements as shipped/delivered by Unified Automation stays under respective license grant as of Section 1 and 2 of this Software License Agreement (SLA) and its source code is confidential. The recipient of this component is NOT bound to any other license the original code may be distributed under i.e. not bound to RCL/RBCL nor any other license.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)
This Windows version of this product includes software written by Tim Hudson (tjh@cryptsoft.com)
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.
Original OpenSSL License:
Copyright © 1998-2007 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS"' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).
Original SSLeay License:
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com). All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The license and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution license [including the GNU Public License].
This product includes code that was developed for the XML toolkit from the GNOME project (http://xmlsoft.org/).
Copyright © 1998-2003 Daniel Veillard. All Rights Reserved.
The libxml2 library is released under the MIT License and includes following copyright notice:
Except where otherwise noted in the source code (e.g. the files hash.c, list.c and the trio files, which are covered by a similar license but with different Copyright notices) all the files are:
Copyright © 1998-2003 Daniel Veillard. All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sub-license, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE DANIEL VEILLARD BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Daniel Veillard shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from him.
The Windows platform layer of the Ansi C Stack can be configured to run on Windows CE, but than requires WCELIBCEX: The WCELIBCEX is a package of C library extensions for Windows CE operating system. It is a supplement to standard C library available on Windows CE system. This extensions library is needed to fully support OPC UA SDK functionality.
Initial version of WCELIBCEX was founded and copyrighted by Taxus SI Ltd., (http://www.taxussi.com.pl)
Copyright © 2006 Taxus SI Ltd.
Created by Mateusz Loskot (mateusz@loskot.net)
The source code of the WCELIBCEX library is licensed under MIT License:
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sub-license, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
The complete license agreement can be found here: (http://opensource.org/licenses/mit-license.php)
The OpenSSL Library can be compiled to run on Windows CE, but therefore requires wcecompat: Windows CE C Runtime Library, a "compatibility" library to fully support OpenSSL functionality. The files of wcecompat are released under the GNU LGPL (Lessen General Public License). By this the OpenSSL Library becomes LGPL and can only be used by linking this library dynamically (do not link static).
Copyright © 2001-2002 Essemer Pty Ltd. All rights reserved.
(http://www.essemer.com.au/)
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
The Bouncy Castle Crypto APIs for Java consist mainly of the following: A lightweight cryptography API for Java and C# and a provider for the Java Cryptography Extension and the Java Cryptography Architecture. The Bouncy Castle Crypto API license is an adaptation of the MIT X11 License and should be read as such.
Copyright © 2000 - 2009 The Legion Of The Bouncy Castle (http://www.bouncycastle.org)
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sub-license, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
The complete license agreement can be found here: (http://www.bouncycastle.org/licence.html)
c-ares is a C library for asynchronous DNS requests (including name resolves), C89 compatibility, MIT licensed, builds for and runs on POSIX, Windows, Netware, Android and many more operating systems.
Copyright 1998 by the Massachusetts Institute of Technology.
Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty.
The C and C++ languages and many operating system environments do not provide full support for Unicode and standards-compliant text handling services. Even though some platforms do provide good Unicode text handling services, portable application code can not make use of them. The ICU4C libraries fills in this gap. ICU4C provides an open, flexible, portable foundation for applications to use for their software globalization requirements. ICU4C closely tracks industry standards, including Unicode and CLDR (Common Locale Data Repository). The ICU license is intended to allow ICU to be included both in free software projects and in proprietary or commercial products. Since ICU 58, ICU is covered by the Unicode license which is very similar to the previous ICU license.
Copyright © 1991-2022 Unicode, Inc. All rights reserved.
UNICODE, INC. LICENSE AGREEMENT - DATA FILES AND SOFTWARE
See Terms of Use (https://www.unicode.org/copyright.html) for definitions of Unicode Inc.’s Data Files and Software.
NOTICE TO USER: Carefully read the following legal agreement. BY DOWNLOADING, INSTALLING, COPYING OR OTHERWISE USING UNICODE INC.'S DATA FILES ("DATA FILES"), AND/OR SOFTWARE ("SOFTWARE"), YOU UNEQUIVOCALLY ACCEPT, AND AGREE TO BE BOUND BY, ALL OF THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE, DO NOT DOWNLOAD, INSTALL, COPY, DISTRIBUTE OR USE THE DATA FILES OR SOFTWARE.
COPYRIGHT AND PERMISSION NOTICE
Copyright © 1991-2022 Unicode, Inc. All rights reserved.
Distributed under the Terms of Use in (https://www.unicode.org/copyright.html)
Permission is hereby granted, free of charge, to any person obtaining a copy of the Unicode data files and any associated documentation (the "Data Files") or Unicode software and any associated documentation (the "Software") to deal in the Data Files or Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Data Files or Software, and to permit persons to whom the Data Files or Software are furnished to do so, provided that either
THE DATA FILES AND SOFTWARE ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE DATA FILES OR SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in these Data Files or Software without prior written authorization of the copyright holder.
jsmn (pronounced like 'jasmine') is a minimalistic JSON parser in C. It can be easily integrated into resource-limited or embedded projects. Most JSON parsers offer you a bunch of functions to load JSON data, parse it and extract any value by its name. jsmn proves that checking the correctness of every JSON packet or allocating temporary objects to store parsed JSON fields often is an overkill.
Copyright (c) 2010 Serge A. Zaitsev
This software is distributed under MIT license, so feel free to integrate it in your commercial products.
Copyright (c) 2010 Serge A. Zaitsev
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
MQTT-C is an MQTT v3.1.1 client written in C. MQTT is a lightweight publisher-subscriber-based messaging protocol that is commonly used in IoT and networking applications where high-latency and low data-rate links are expected. The purpose of MQTT-C is to provide a portable MQTT client, written in C, for embedded systems and PC's alike.
Copyright (c) 2018 Liam Bindle
LiamBindle/MQTT-C is licensed under the MIT License
Copyright (c) 2018 Liam Bindle
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Eclipse Mosquitto is an open source (EPL/EDL licensed) message broker that implements the MQTT protocol versions 5.0, 3.1.1 and 3.1. Mosquitto is lightweight and is suitable for use on all devices from low power single board computers to full servers. The MQTT protocol provides a lightweight method of carrying out messaging using a publish/subscribe model. This makes it suitable for Internet of Things messaging such as with low power sensors or mobile devices such as phones, embedded computers or microcontrollers. The Mosquitto project also provides a C library for implementing MQTT clients, and the very popular mosquitto_pub and mosquitto_sub command line MQTT clients.
Mosquitto is part of the Eclipse Foundation, is an iot.eclipse.org project and is sponsored by cedalo.com.
Mosquitto was written by Roger Light (roger@atchoo.org)
This project is dual licensed under the Eclipse Public License 2.0 and the Eclipse Distribution License 1.0 as described in the epl-v20 and edl-v10 files (https://www.eclipse.org/org/documents/edl-v10.php)
Eclipse Public License - v 2.0 see here for details: (https://www.eclipse.org/legal/epl-2.0/)Eclipse Distribution License - v 1.0
Copyright (c) 2007, Eclipse Foundation, Inc. and its licensors. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licensed Software's main and plug-in libraries of the SDK in object code form
The licensed Software's communication stack in object code form ("C-Stack", "JAVA-Stack", ".NET Stack")
The licensed Software's administration and configuration tool ("UaAdminDialog, UaConfigTool")
The licensed Software certificate generation tool ("Opc.Ua.CertificateGenerator.exe")
The licensed Software's source code and/or header files of any of the SDK modules
The licensed Software's binary files together with header files of any of the SDK modules
The licensed Software's source code and header files of the communication stacks ("C-Stack", "JAVA-Stack", ".NET Stack")
The licensed Software's source code and header files of the UA Stack's platform layer
The licensed Software's tool for modelling Addressspace and code generation ("UaModeler")
The licensed Software's documentation
Notices to Unified Automation shall be given to:
Unified Automation GmbH
An der Kaufleite 34
D-90562 Kalchreuth, Germany
Fax: +49 911 495 250 09